• Guys, we've spent considerable money converting the Les Paul Forum to this new XenForo platform, and we have ongoing monthly operating expenses. THE "DONATIONS" TAB IS NOW WORKING, AND WE WOULD APPRECIATE ANY DONATIONS YOU CAN MAKE TO KEEP THE LES PAUL FORUM GOING! Thank you!

Les Paul R0 fretboard

mikeymikey

New member
Joined
Dec 30, 2020
Messages
8
I am looking for a 1960 custom shop les paul. I tried one with which I have a particular feel, but the fretboard leaves me perplexed: I do not doubt the fact that it is original, it is a new guitar from an official shop, but the fretboard in rosewood should’t be as dark as possible?

157692592-10226811400697609-6989596726035003550-o.jpg
 

AA00475Bassman

Well-known member
Joined
Apr 26, 2016
Messages
3,769
I have several very dark Historic fretboards , I prefer dark . Although the some are ridiculously light some are very dark .
 

mikeymikey

New member
Joined
Dec 30, 2020
Messages
8
I have several very dark Historic fretboards , I prefer dark . Although the some are ridiculously light some are very dark .
I think you should reread what I wrote, rather than write nonsense comments.

I asked if high quality fretboards should usually be darker than this one
 

AA00475Bassman

Well-known member
Joined
Apr 26, 2016
Messages
3,769
"I asked if high quality fretboards should usually be darker than this one"


What don't you understand about the color of historic fretboards some are light colored some are dark .

What ever made you think Gibson has a standard for Historic guitars as far as fret board color .

If you don't like the fretboard move on find the guitar that checks all your criteria .
 
Last edited:

sunking101

Member
Joined
Jan 13, 2020
Messages
102
Over the years we have used up all the dark ebony and rosewood. Although darker fretboards can still be found the majority are much lighter these days and that's just the way it is.

It's still rosewood and arguably shows more character when it isn't a slab of black wood. You can see patterns in the grain and of course these boards can be darkemed with oils and even dyes if you so desire.
 

Big Al

Well-known member
Joined
Apr 24, 2002
Messages
14,537
This is pretty lame and indicative of newer lower information players. That is exactly the color of most braz rosewood when new and lots of east indian. COLOR is not quality. That is more about grain and density than color which has always been highly variable.

Now it seems everyone expects rosewood to look like ebony or some oxidised oil soaked 60 year old 'board and post pics of perfect high quality rosewood as questionable because apparently this isn't dark enough to be high quality??

I get it, the internet floods us with an overload of opinion presented as fact and preference becomes quality because fashion is the most important spec. Quality maple now has an abundance of flecks and mineral streaks, finish crazing now is a good thing and weight alone qualifies mahogany as high quality, not grain, stiffness or hardness certainly not density, specs that have impact on quality are ignored.

I can see that this is not the lighter blonde tan color and is the darker type, as spec'd but apparently not quite none more dark enough to be high quality to satisfy fashion. So pass it up, walk on by and wait for one dark enough to suit your fashion sense.

All I see is yet another picture of rosewood that you can still see the wood in and labled too light to be high quality. This is getting stale.
 

snag

Member
Joined
Jan 1, 2010
Messages
254
A question mark doesn't necessarily mean a question, just that the ? key on your keyboard works.
 

NYCBURST

Active member
Joined
May 11, 2016
Messages
288
I am looking for a 1960 custom shop les paul. I tried one with which I have a particular feel, but the fretboard leaves me perplexed: I do not doubt the fact that it is original, it is a new guitar from an official shop, but the fretboard in rosewood should’t be as dark as possible?

157692592-10226811400697609-6989596726035003550-o.jpg
This is what is standard on the customshop models I'm afraid. Original 59's had Brazilian rosewood, the customshop uses Indian or Bolivian and the quality of the pieces is poor these days, they are running out of good pieces.. Every once in a while you'll see a good piece.
 

NYCBURST

Active member
Joined
May 11, 2016
Messages
288
This is pretty lame and indicative of newer lower information players. That is exactly the color of most braz rosewood when new and lots of east indian. COLOR is not quality. That is more about grain and density than color which has always been highly variable.

Now it seems everyone expects rosewood to look like ebony or some oxidised oil soaked 60 year old 'board and post pics of perfect high quality rosewood as questionable because apparently this isn't dark enough to be high quality??

I get it, the internet floods us with an overload of opinion presented as fact and preference becomes quality because fashion is the most important spec. Quality maple now has an abundance of flecks and mineral streaks, finish crazing now is a good thing and weight alone qualifies mahogany as high quality, not grain, stiffness or hardness certainly not density, specs that have impact on quality are ignored.

I can see that this is not the lighter blonde tan color and is the darker type, as spec'd but apparently not quite none more dark enough to be high quality to satisfy fashion. So pass it up, walk on by and wait for one dark enough to suit your fashion sense.

All I see is yet another picture of rosewood that you can still see the wood in and labled too light to be high quality. This is getting stale.
I will agree with this statement, what I find is that most people (novice for lack of a better word) 1959 people see the Brazilian rosewwod and expect the indian and bolivian rosewood to look like that, which it's never going to. There were a lot of light pieces of brazilian rosewood on 59 les pauls which with time and lots of hand oil oxidized just as you pointed out that look great. "Sandy" being one of those guitars and also Jimmy pages number one has a very light wide grained fingerboard..
 

Big Al

Well-known member
Joined
Apr 24, 2002
Messages
14,537
This is what is standard on the customshop models I'm afraid. Original 59's had Brazilian rosewood, the customshop uses Indian or Bolivian and the quality of the pieces is poor these days, they are running out of good pieces.. Every once in a while you'll see a good piece.
How?? Softwood? Knots? Wormy? Or you just think the look in some photo shows a lack of quality across the line. Just how much rosewood is left that you can reject away fine grained, dense wood just because you think it should be darker? Look on the sites, whole range from almost black, semi sweet to milk chocolate and reddish and brown shades. The wood is good the color varies. I have Martins with rosewood of every shade.
 

AA00475Bassman

Well-known member
Joined
Apr 26, 2016
Messages
3,769
We can all go on about what was & what is, the OP was either trolling or trying to do what he did accomplish not wanting to be educated by example or experience.
The OP was rude in his response to my post !

Fretboards are light colored & dark they have been in the past they will be in the future . My 65 Firebird had a very Carmel ,dark Chocolate board !
 
Last edited:

sunking101

Member
Joined
Jan 13, 2020
Messages
102
My R7 has a light-ish board but there is a whole group of people out there who won't accept guitars unless they have the darkest of rosewood fretboards.
 

NYCBURST

Active member
Joined
May 11, 2016
Messages
288
How?? Softwood? Knots? Wormy? Or you just think the look in some photo shows a lack of quality across the line. Just how much rosewood is left that you can reject away fine grained, dense wood just because you think it should be darker? Look on the sites, whole range from almost black, semi sweet to milk chocolate and reddish and brown shades. The wood is good the color varies. I have Martins with rosewood of every shade.
aesthetic quality !! Big, Al...... Martin's with rosewood fingerboards?
 

NYCBURST

Active member
Joined
May 11, 2016
Messages
288
aesthetic quality !! Big, Al...... Martin's with rosewood fingerboards?
One thing I'll never understand is why on a customshop they will put a poor "looking" piece of rosewood and on their cheaper models you'll come across some really nice dark pieces of rosewood.. In my opinion, it's just a phycological look thing it doesn't have anything to do with tone..
 

NYCBURST

Active member
Joined
May 11, 2016
Messages
288
Incidentally, This is a closeup I took of Jimmy page's fretboard, a very light wide grained piece of Brazilian rosewood. I think that guitar had some good tone.. lol
 

Attachments

  • jp3.jpg
    jp3.jpg
    360.6 KB · Views: 44
  • jp.jpg
    jp.jpg
    336.6 KB · Views: 44
  • 22.jpg
    22.jpg
    391.5 KB · Views: 45
Top