Guys, we've spent considerable money converting the Les Paul Forum to this new XenForo platform, and we have ongoing monthly operating expenses. THE "DONATIONS" TAB IS NOW WORKING, AND WE WOULD APPRECIATE ANY DONATIONS YOU CAN MAKE TO KEEP THE LES PAUL FORUM GOING! Thank you!
Faber makes two different styles for this. The iNsert just taps down into the Nashville bushing hole. There is a tiny lip that shows but not nearly as bad as the top of the Nashville bushing.
Faber makes two different styles for this. The iNsert just taps down into the Nashville bushing hole. There is a tiny lip that shows but not nearly as bad as the top of the Nashville bushing. I’ve used the iNsert, it’s easy. You just have to make sure the holes are deep enough to accept the inserts. Use a drill bit to remove wood until you have the proper depth . The other Faber kit is the BSWKIT. This kit has a threaded lower section that screws into the body. You must use a tap to do this install. Here’s a link:https://faberusa.com/product-catego...-bridge-posts/bswkit-conversion-bridge-posts/