tommersjay
Member
- Joined
- Jun 11, 2015
- Messages
- 134
So I rewired an existing pushpull volume tone pot for the neck pick up and installed russian PIO caps. I have the pushpull doing a coil split and the bridge pup is wired normally. I know for certain that everything is wired correctly but the volumt pot that was previously mentioned, will not roll off the volume at a certain point. Basically, the volume adjusts between 6-10 but anything below a volume of 6 stays the same and never fades out. Everything else works as far as the wiring goes and the other volume pot works fine too. I dont hear any issue with the tone, I just want to know why its not working like it should. Its frustrating to not have your guitar at 100%.